Zenith XZM Ultrafine mill is widely used in making fine powder or micro powder, a new kind of machine for producing ultrafine powder.XZM Ultrafine Mill is widely used in many industrial, such as building, chemical, chemical fertilizer, metallurgy, mining, nonmetal, abrasive, bearing materials, ceramic, steel, thermal power, bricks & tiles, coal industry, etc. grinding mill can grind these materials which are 9 or less on the Mohs scale, and moisture is below 6%., and they should be nonexplosive and nonflamable mining materials. The final size can be adjusted from 30 to 400 meshes easily.

XZM Ultrafine Mill(Pulverizer) Working Principle :
The main bearing and each dial are driven by electromotor of main equipment through reducer, and numbers of rings and rolls which are rolling in the ring channels are driven by dial through plunger. After being crushed by hammer crusher, the big materials become small ones and they are sent to the storage bin by elevator. The electromagnetic vibrating feeder sends them to the middle of first dial evenly; the materials will be driven to the edge of dial by centrifugal force, and fall into the ring channels and pressed, crushed and ground by the grinding rings and rolls. Then the materials fall into the second and third ring and crushed and ground. The high pressure centrifugal blower inhales air from the outside and blow the materials which are ground in the third ring to power classifier. The rotating turbo in the powder classifier makes the coarse materials return to the mill and reground, while the fineness mixes with the air and be drawn to the cyclone and be discharged from the discharge valve which is in the bottom of it. The air which mixed with very little fineness are purified by impulse duster and discharged by blower and muffler.

XZM Ultrafine Mill(Pulverizer) Technical Advantage:
(1)High effiency:With the same condition of finished particle size and power of motor,the output of it is 40% higher than that of airflow mill and whisk mill.
(2)High using rate of the quick-wear part : With the same condition of material and finished particle size ,the lifetime of the quick-wear part is longer than that of impact crusher and turbine crusher ,which can be generally over one year.
(3) High safety: Owing to no axle tree and bolt in the grinding antrum,there will be no wearout of bearing and sealing part ,and also no loose of bolts
(4) Environment-friendly : Equipped with pulse filter and sound absorber ,the mill reaches environment- friendly standard of our country’s and reduces dust and noise greatly.

XZM Ultrafine Mill(Pulverizer) Technical Data:

Note: If there is any modification,all parameter and overall dimension are subject to the operating instructions.